2.6Jumpers

1.Keyboard power (3-pin KBPWR)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS (see section 4.5.1 Power Up Control).

KBPWR1

PSCH-L

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

PSCH-L Keyboard Power Setting

2.RAID enable (3-pin RAID_EN)

This jumper allows you enable or disable the onboard RAID feature.

PSCH-L

 

 

RAID_EN

 

 

1

2

2

3

PSCH-L RAID Setting

Enable

Disable

(Default)

 

 

ASUS PSCH-L motherboard

2-17