IDE Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices. Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

ATA(PI) 80Pin Cable Detection [Host & Device]

Selects the mechanism for detecting 80-pin ATA/ATAPI cable. Configuration options: [Host & Device] [Host] [Device]

4.4.5 USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then press Enter to display the configuration options.

USB Configuration

Enables USB host

Module Version - 2.23.2-7.4

controllers.

 

USB Devices Enabled:

 

 

None

 

USB Function

[All USB Ports]

Legacy USB Port

[Enabled]

USB 2.0

Controller

[Enabled]

USB 2.0

Controller Mode

[HiSpeed]

The Module Version and USB Devices Enabled items show the auto- detected values. If no USB device is detected, the item shows None.

USB Function [All USB Ports]

Allows you to set the number of USB ports to activate. Configuration options: [Disabled] [2 USB Ports] [All USB Ports]

Legacy USB Support [Enabled]

Allows you to enable or disable support for legacy USB devices. Setting to Auto disables the legacy support if no USB devices are connected. Configuration options: [Disabled] [Enabled] [Auto]

ASUS PSCH-L motherboard

4-23