4.3.2 System Time [xx:xx:xxxx]

Allows you to set the system time

4.3.3 System Date [Day xx/xx/xxxx]

Allows you to set the system date

4.3.4 Floppy A [1.44M, 3 1/2”]

Sets the type of floppy drive installed. Configuration options: [Disabled] [360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.] [2.88M, 3.5 in.]

4.3.5Primary and Secondary IDE Master/Slave, Third IDE/SATA, Fourth IDE/SATA

While entering Setup, BIOS auto-detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press Enter to display the IDE device information.

Primary IDE

Master

Device

: Hard Disk

Vendor

: ST320413A

Size

: 20.0GB

LBA Mode

: Supported

Block Mode

: 16 Sectors

PIO Mode

: 4

Async DMA

: MultiWord DMA-2

Ultra DMA

: Ultra DMA-2

S.M.A.R.T.

: Supported

Type

[Auto]

LBA/Large Mode

[Auto]

Block (Multi-sector Transfer)

[Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

S.M.A.R.T.

[Auto]

32Bit Data Transfer

[Disabled]

Select the type of device connected to the system.

The values opposite the dimmed items (Device, Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring) are auto-detected by BIOS and are not user-configurable. These items show N/A if no IDE device is installed in the system.

4-12

Chapter 4: BIOS Setup