6.Chassis intrusion connector (4-1 pin CHASS1)

This lead is for a chassis designed with intrusion detection feature. This requires an external detection mechanism such as a chassis intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a high-level signal to this lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. If you wish to use the chassis intrusion detection feature, remove the jumper cap from the pins.

PSCH-L

CHASS1

+5VSB MB

Chassis Signal GND

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Default)

PSCH-L Chassis Intrusion Connector

7.Power supply thermal connector (2-pin THERMAL_AUX)

If your power supply has a thermal monitoring feature, connect its thermal sensor cable to this connector.

PSCH-L

THERMAL_AUX

GND

VREF

PSCH-L Thermal Connector

ASUS PSCH-L motherboard

2-23