2.1Chassis cover

The chassis features a “screwless design” that allows convenient assembly and disassembly.

•Remove the front bezel to access the hot-swap HDDs, optical drive, and floppy drive.

•Remove the chassis cover to access the internal components or if you wish to install system devices.

2.1.1 Removing the front bezel

To remove the front bezel:

1.Hold the sides of the front bezel, then slightly press the middle part to disengage it from the front panel.

Press here to release

2.Pull the bezel from the front panel.

2-2

Chapter 2: Hardware setup