Asus AP2400R-E1 manual 69

6.ATX power connectors (24/20-pin ATXPWR, 8-pin CON12V)

These connectors connect to an ATX 12V power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

In addition to the 24/20-pin power connector, this motherboard requires that you connect the 8-pin +12V power plug to provide sufficient power to the CPU.

Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 2A on the +5-volt standby lead (+5VSB). The minimum recommended wattage is 230W, or 300W for a fully configured system. The system may become unstable and may experience difficulty powering up if the power supply is inadequate.

		Ground	+5 Volts	+5 Volts
24-pin Power Connector
	ATXPWR
		+3 Volts	+12 Volts	+12 Volts

4-pin

CON12V

PR-DLS533

PR-DLS533 ATX Power Connectors

+5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts

Standby+5V	ForPowerOK		Power+5Volts			Supply+5Volts Ground	+3Volts	+3Volts
			Ground		Ground
			with 20-pin
		Power Connector
12V		12V	12V	12V
						8-pin
GND		GND	GND	GND

1

ASUS AP2400R-E1 2U barebone server 4-11