3.Gigabit LAN1 controller setting (3-pin 1GLAN_EN)

This jumper allows you to enable or disable the 64-bit Intel® 82544GC Gigabit LAN controller. Setting this jumper to pins 2-3 disables the Gigabit LAN port (RJ-45) on the rear panel that corresponds to this controller.

1G LAN_EN

Enable Disable (Default)

PR-DLS533

PR-DLS533 1G LAN Setting

4.SCSI setting (2-pin SCSI_EN)

This jumper allows you to enable or disable the onboard SCSI feature. Keep the jumper open if you wish to install SCSI devices. Place a cap on the jumper to disable the onboard SCSI controller.

SCSI_EN

Enable Disable (Default)

PR-DLS533

PR-DLS533 SCSI Setting

4-6

Chapter 4: Motherboard information