2.7.3 Power supply modules
The barebone system ships with one power supply module. You may purchase a second power supply module for redundancy.
To uninstall a power supply module:
1.Locate the power supply modules on the rear panel, and select the module that you wish to remove.
2.Hold the module lever and press the latch on the inner side to release the module.
3.Firmly pull the lever to slide the power supply module out of the chassis.
The module lever bends down about half an inch as the power supply slides out.
4.Repeat steps 2 to 3 to remove the other module.
Chapter 2: Hardware setup |