2.LAN controller setting
This jumper allows you to enable or disable the onboard Intel® 6321 Gigabit LAN controller. Set to pins
LAN1_EN1
2 | 1 |
| 3 | 2 |
|
|
|
|
|
Enable Disable (Default)
3.USB device
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S4 sleep mode (no power to CPU, DRAM, power supply in reduced power mode).
USBPW12 |
| |||
1 2 |
|
| 2 | 3 |
+5V | +5VSB | |||
(Default) |
|
|
| |
USBPW34 |
| |||
2 | 1 | 3 | 2 |
|
+5V | +5VSB | |||
(Default) |
|
|
| |
|
|
|
|
•The USB device
500mA on the +5VSB lead for each USB port; otherwise, the system will not power up.
•If you are using Windows® 2000, you need to install Service Pack 4 to wake up the system from S4 sleep mode.
•The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.
ASUS |