10.CPU and system fan connectors
The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.) or a total of 2.1 A ~ 4.44 A (53.28 W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors!
CPU_FAN1
REAR_FAN1
REAR_FAN2
FBD_FAN1
CPU_FAN2
FRNT_FAN2
FRNT_FAN1
FRNT_FAN3
FRNT_FAN4
CPU_FAN1 | CPU_FAN2 |
|
| ||||||||
|
|
|
|
| PWM Control |
|
|
|
|
| |
| Speed Power |
| FAN Speed |
|
|
|
|
| |||
| FAN Power |
|
|
|
|
| |||||
Control | GND |
| GND |
|
|
|
| ||||
|
|
|
| ||||||||
| FAN FAN |
|
|
|
|
|
|
| |||
PWM |
|
|
| REAR_FAN2 FBD_FAN1 | |||||||
REAR_FAN1 | |||||||||||
GND FAN Power FAN Speed PWM Control | GND FAN Power FAN Speed PWM Control | GND FAN Power FAN Speed PWM Control | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FRNT_FAN1 FRNT_FAN2
PWM Control |
| PWM Control |
|
FAN Speed |
| FAN Speed |
|
FAN Power |
| FAN Power |
|
GND |
| GND |
|
FRNT_FAN3 FRNT_FAN4 | |||
PWM Control |
| PWM Control |
|
FAN Speed |
| FAN Speed |
|
FAN Power |
| FAN Power |
|
GND |
| GND |
|
|
|
11.Power supply SMBus connector
This connector is for the power supply SMB cable, if your power supply supports the SMBus function.
PSUSMB1
I2C_7_CLK# I2C_7_DATA# NC GND +3.3V Remote Sense
Chapter 2: Hardware information |