4.Keyboard power
This jumper allows you to enable or disable the keyboard
KBPWR1
1 2 | 2 3 |
+5V +5VSB (Default)
5.Intel® 6321ESB SATA port S/W RAID setting
This jumper allows you to select the Serial ATA RAID configuration utility to use when you create disk arrays. Both utilities are supported by the
Intel® 6321ESB. Place the jumper caps on pins
MegaRAID Serial ATA RAID utility (default); otherwise, place the jumper caps on pins
| RAID_SEL1 | |
| 2 | 3 |
| 2 | |
| 1 |
|
LSI | Intel | |
(Default) |
|
Chapter 2: Hardware information |