6.Onboard storage setting
This jumper allows you to select the onboard storage to use. Place the jumper caps on pins
Serial ATA II devices (default); otherwise, place the jumper caps on pins
SAS_EN1
| 1 | 2 | 2 | 3 |
Enable | Disable | |||
(Default) |
|
|
7.LAN bandwidth setting
This jumper allows you to set the LAN bandwidth setting for more efficient IP load distribution.
LAN_BW1
1 | 2 | 2 | 3 |
Balanced mode | Centric mode | ||
(Default) |
|
|
Balance Mode: It's 1 x 8 link between MCH and ESB2;
LAN Centrical Mode: It's 2 x 4 link between MCH and ESB2.
ASUS |