15.LPC debug card connector
This is a low pin count interface used to plug in the LPC debug card.
LPC1
PIN1
3V.+3 3V.+3 3V.+3 GND GND LAD2_LPC LAD3_LPC LAD0_LPC LAD1_LPC PLTRST N_LFRAME CLK GND
16.Auxiliary panel connector
This connector is for additional front panel features including front panel SMB, locator LED and switch, chassis intrusion, and LAN LEDs.
|
| 1 | 2 | 2 |
| NC I2C 4 CLK# | GND I2C 4 DATA# +5VSB LAN1 LINK LAN1 ACT LAN2 ACT LAN2 LINK | ||
AUX_PANEL1 |
|
|
| |
| PIN1 | CASEOPEN GND LOCATORLED1+ LOCATORLED1- LOCATORBTN# GND LOCATORLED2- LOCATORLED2+ | ||
+5VSB |
3 4 5 4
1.Front panel SMB
These leads connect the front panel SMBus cable.
2.LAN activity LED
These leads are for Gigabit LAN activity LEDs on the front panel.
3Chassis intrusion
These leads are for the intrusion detection feature for chassis with intrusion sensor or microswitch. When you remove any chassis component, the sensor triggers and sends a
4.Locator LED
These leads are for the locator switch and LED on the front panel.
ASUS |