PIO Mode [Auto]

Selects the PIO mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

4.3.6SATA 1-12

While entering Setup, the BIOS automatically detects the presence of Serial ATA devices. There is a separate sub-menu for each SATA device. Select a device item, then press <Enter> to display the SATA device information.

 

SATA 1

 

Disabled: Disables

Device

: Not Detected

 

LBA Mode.

 

Auto: Enables LBA

 

 

 

LBA/Large Mode

 

[Auto]

Mode if the device

 

supports it and

Block(Multi-sector Transfer) M

[Auto]

the device is not

PIO Mode

 

[Auto]

 

already formatted

DMA Mode

 

[Auto]

 

with LBA Mode

SMART Monitoring

[Auto]

disabled.

32Bit Data Transfer

[Enabled]

 

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Configuration options: [Disabled] [Auto]

4-14

Chapter 4: BIOS setup