4.4.4Onboard Devices Configuration
Configure ITE8712 Super IO Chipset | Allows BIOS to Enable | ||
Onboard Floppy Controller | [Enabled] | or Disable Floppy | |
Controller. | |||
Serial Port1 Address | [3F8/IRQ4] | ||
| |||
Parallel Port Address | [378] |
| |
Parallel Port Mode | [EPP+ECP] |
| |
EPP Version | [1.9] |
| |
ECP Mode DMA Channel | [DMA3] |
| |
Parallel Port IRQ | [IRQ7] |
| |
Configure Onboard Device |
|
| |
OnBoard VT6308 1394 | [Enabled] |
| |
OnBoard Sil3531 eSATA | [Enabled] |
| |
eSATA OptionROM | [Disabled] |
| |
Onboard Floppy Controller [Enabled]
Allows you to enable or disable the onboard floppy controller Configuration options: [Enabled] [Disabled]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base address.
Configuration options: [Disabled] [378] [278]
Parallel Port Mode [EPP+ECP]
Allows you to select the Parallel Port mode.
Configuration options: [Normal] [EPP] [ECP] [EPP+ECP]
EPP Version [1.9]
Appears only when the Parallel Port Mode is set to [EPP] or [EPP+ECP]. This item allows the BIOS to select the Parallel Port EPP version.
Configuration options: [1.9] [1.7]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP] or [EPP+ECP]. This item allows the BIOS to set the Parallel Port ECP DMA.
Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select the parallel port IRQ.
Configuration options: [IRQ5] [IRQ7]
ASUS |