4.5.4APM Configuration
APM Configuration |
| Options | |
Restore on AC Power Loss | [Power Off] | ||
| |||
| |||
Power Management/APM | [Enabled] | Power Off | |
Resume On PME# | [Disabled] | Power On | |
Resume On PCIE Wake# | [Disabled] |
| |
Resume On LAN | [Disabled] |
| |
Resume On Ring | [Disabled] |
| |
Resume On PS/2 Keyboard | [Disabled] |
| |
Resume On PS/2 Mouse | [Disabled] |
| |
Resume On RTC Alarm | [Disabled] |
|
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On]
Power Management/APM [Enabled]
Enables or disables the Advanced Power Management (APM) features. Configuration options: [Disabled] [Enabled]
The succeeding items appear when the Power Management/APM item is set to [Enabled].
Resume On PME# [Disabled]
Enables or disables the Power Management Event (PME) function to generate a wake event. Configuration options: [Disabled] [Enabled]
Resume On PCIE Wake# [Disabled]
Enables or disables the PME to wake up from S5 by PCIE devices. Configuration options: [Disabled] [Enabled]
Resume On LAN [Disabled]
Enables or disables the Marvell® LAN to generate a wake event. Configuration options: [Disabled] [Enabled]
Resume On Ring [Disabled]
Enables or disables the RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Chapter 4: BIOS setup |