ENGLISH
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware settings that are needed for system startup in the Desktop PC.
In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance. Do not change the default BIOS settings except in the following circumstances:
•An error message appears on the screen during the system bootup and requests you to run the BIOS Setup.
•You have installed a new system component that requires further BIOS settings or update.
Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel.
Quickly enter the BIOS
Windows® 8 boot time is quite fast, so we developed the following two ways for you to quickly access the BIOS:
•Press the power button for at least four seconds to shut down your Desktop PC, then press the power button again to turn your Desktop PC back on, and press <Del> during POST.
•When your Desktop PC is off, disconnect the power cord from your Desktop PC’s power connector. Reconnect the power cord and press the power button to turn on your Desktop PC. Press <Del> during POST.
POST
32 | Chapter 2: Using Windows® 8 |
