Mitsubishi Electronics WD-65C8 manual Setup Menu Options, Enter

5. TV Menus 43

Setup Menu

Use the Setup menu to:

• Select English or Spanish for menus and on-screen text.

•Scan the channels available for the antenna or cable

service connected to the ANT 1 or ANT 2 jacks.

• Edit channel options, including channel locking.

•Set the TV’s internal clock.

•Set the TV Timer to turn on the TV automatically at a designated time.

•	Set the energy mode for power consumption when	Setup menu, Scan option
	the TV is powered off.
• Set the TV Lamp Mode.
•	Turn 3D mode on and off.

Setup Menu Options

	English	Display on-screen menus in either English or Spanish.
	Spanish	Note: To listen to audio in other languages (when available), see the section
Language		on the AV menu, Audio submenu, and refer to either Listen To > SAP (analog
		signal) or Language (digital signal).
	Ant-1 Air	Scan memorizes broadcast channels to make them easier to find. To start
Scan	Ant-1 Cable	channel memorization:
	Ant-2 Air	1.	Highlight one of the input selections based on your connection to ANT 1
	Ant-2 Cable
			or ANT 2:
			• Air when connected to an indoor or outdoor antenna.
			• Cable when connected to direct cable (no cable box)
		2.	Press to highlight START.
		3.	Press ENTER to start channel memorization for the selected input.

Notes on Scan and channel memorization:

•Channel memorization may take up to 15 minutes to complete.

•To stop channel memorization before completion, press CANCEL.

•When watching TV, press CHto move through memorized channels.

•To add a digital channel that does not appear in the Edit menu without repeating channel memori- zation:

1.Look up the physical channel number for the new digital channel. The website www.antennaweb.org can help you find the physical channel number.

2.Tune to any channel on the Ant 1 or Ant 2 input your antenna is connected to.

3.Use the number keys and

CANCEL key to enter the physical channel number followed by “-1” and ENTER. For example, for physical channel 36, press

3 6 — 1 ENTER.

CANCEL

The TV will search for a digital channel on the channel 36 frequency. When it finds the channel, it will:

a.Add the channel to memory.

b.Change the channel number to the virtual channel number sent by the broadcaster.

c.Add to memory any associated sub- channels.

•Rememorize channels if you move the TV to a different geographic area with a different channel line-up.