Mitsubishi Electronics WD-65C8 manual Initial Set-Up, To Watch 3D Video

4. TV Operation and Features 35

3D Video

This section provides Instructions for viewing 3D video using the TV’s 3D feature. The 3D options are found in the Setup > 3D menu described on page 47 .

Initial Set-Up

1.Check if your HDMI 3D video source device outputs a 1080p 60 Hz signal. This information will be needed when you assign an input name in the Auto Input Sensing screen.

2.If your 3D glasses came with an emitter box, connect the emitter box to the 3D GLASSES EMITTER jack on the back of the TV. See page 9 for the location of the jack.

3.Power on the TV and the source device.

4.Connect the source device to the TV’s HDMI input.

5.When the Auto Input Sensing screen displays, name the input according to the table below.

The signal type and choice of name are important because the TV will process the video signal differently depending on the name you assign. If your source device is a high-definition disc system, such as Blu-Ray or HD DVD, or is a game console, the signal must be 1080p at 60 Hz.

6.Press EXIT to close the Auto Input Sensing screen.

Source of 3D Video

Computer

Any other 3D video source

Type of 3D Video Signal

Recommended: 1080p 60 Hz (1920 X 1080). The image will fill the TV screen.

Other 60-Hz computer video signals compatible with the TV will display with black bars. See “Computer Display Formats” on page 18.

To see 3D video, signal must be 1080p 60 Hz

Name to Assign to Video Input

PC

Any name other than

PC

To Watch 3D Video

1.Press INPUT to display the Input Selection menu.

2.Highlight the icon for the 3D video input and press

ENTER.

3.Press MENU and select the Setup > 3D Mode menu.

4.Set 3D Mode to On. The On setting will be memo- rized for the current input when you exit this menu.

5.Press EXIT to close the menu.

To Watch Regular (non-3D) Video

The 3D Mode setting is memorized for each input. When you want to watch non-3D video on the input selected above:

1.Select the input in the Input Selection menu.

2.Open the Setup > 3D menu and set 3D Mode to Off.

Use the Setup > 3D Mode menu to enable 3D video viewing.