Mitsubishi Electronics WD-65C8 manual About NetCommand IR Control, Important Note on NetCommand

52 6 NetCommand IR Control

About NetCommand IR Control

Note: To learn about NetCommand for HDMI devices, available on all TV models, see Appendix E, “NetCommand HDMI Control of CEC Devices,” page 77.

•NetCommand IR home-theater control is avail- able on the following models:

--WD-65736, WD-73736 --WD-65835, WD-73835

•NetCommand setup is optional.

•You may wish to use NetCommand IR control to supplement CEC control.

•You can perform NetCommand setup when the TV first recognizes a device during Auto Input Sensing or at any convenient time afterward.

•NetCommand operates by sending remote control signals from the TV to your other devices via the IR emitters, telling the devices to play, record, change

Important Note on NetCommand

Be sure to connect the IR emitter cable to the TV and properly place the emitters so that NetCommand can control your devices. See the explanation on the opposite page.

inputs, adjust volume, change channels, or perform other functions. All this is accomplished with the TV’s remote control and the slide switch left in the TV position.

•The IR “Learning” feature of NetCommand allows the TV to learn the IR control signals for your A/V devices.

•You can choose the level of NetCommand control for your home theater.

Standard Setup. Perform a standard setup if you want NetCommand to control only a few devices, such as the TV, a playback device (like a DVD player), and a cable box. With this setup, you can use the TV’s remote control to operate these devices.

A/V Receiver Setup. Perform A/V receiver setup if you want NetCommand to:

Control a surround sound A/V receiver.

Automatically change audio input selections on an A/V receiver when you change inputs on the TV.

Automatically change audio and video input selections on an A/V receiver with an HDMI output to the TV.