Mitsubishi Electronics WD-65C8 manual Inside the Guide, Outside the Guide

	6. NetCommand IR Control (736 and 835 Series TVs)		57
Operating NetCommand-Controlled Devices, continued
Key Name in	Special Operation Description and Setup	How to Use
Learning Screen
Guide	Displaying the Disc Menu (DVD or high-defini-	While watching the device, press GUIDE to display the
	tion disc format)	disc menu.
	“Learn” the Disc Menu, Top Menu, or other key as
	named on the original remote in the Guide learn-
	ing position.
	Displaying the On-Screen Program Guide	1. While watching the device, press GUIDE to
	(cable box or satellite receiver)	display the guide.
	1. “Learn” the Guide key on the original remote in	2. Press CH/PAGE  /	to send the Page Up/Dn
		commands for the guide.
	the Guide learning position.

2. Learn the PAGE and PAGE keys of the original remote in the Page Up and Page Dn learning positions.

Page Up	Using Page Up/Down				•	Inside the Guide
Page Dn	If the device’s original remote control has separate					Press CH/PAGE	/	to send the Page Up/Dn
						commands.
	keys for Channel Up/Dn and Page Up/Dn, the TV
	remote control’s CH/PAGE			/  key can work like	•	Outside the Guide
	the two separate keys.
						Press CH/PAGE	/	to send the Channel Up/
	1.	“Learn” CHANNEL	/	in the Channel Up/Dn
						Dn signal.
		positions.
	2.	“Learn” PAGE /	in the Page Up/Dn posi-
		tions.
Enter	Enter Functions (cable boxes, satellite receivers, etc.)
	Some devices have two keys that have “enter” functions. One key is for menus and is often labelled
	SELECT or OK. A second key is for use with number keys for direct channel selection. NetCommand uses
	the same ENTER key for both operations.

When ENTER has a menu or guide function or when the original remote control uses the same key for menus and channel selection:

Learn the ENTER, SELECT, or OK key in the NetCommand Enter learning position.

1.Press MENU or GUIDE to display the device’s menu or guide.

2.Press ENTER within the menu and NetCommand will send the Enter signal for menus.

Enter (digits)	When ENTER is for channel changes, i.e., the original	Press digit key(s) and then press ENTER.
	remote control has a separate ENTER key for this	NetCommand will send the Enter signal for channel
	function):	selection.
	Learn the ENTER key for channel selection in the
	NetCommand Enter (digits) learning position.
	Use this learning position only if the original
	remote control has separate keys for Enter in
	menus and Enter for channel selection.
Cancel	CANCEL as the Cancel or Exit Function	1. Press MENU or GUIDE to display the menu or guide.
	“Learn” the Cancel or Exit function in the	2.	—
			Press CANCEL and NetCommand will send the
	NetCommand Cancel learning position		Cancel or Exit signal.
—	The symbol “—” can serve as the separator		—
(separator)	between a digital channel’s main and sub-	Press digit key(s) and press CANCEL . NetCommand
		will send the channel-separator signal.
	channel digits, e.g., digital channel 12-1 (main

channel is 12, sub-channel is 1).

“Learn” the channel separator function in the NetCommand – (separator) learning position.