Mitsubishi Electronics WD-65C8 manual Appendix F Troubleshooting, TV Reset Comparison Guide

80Appendices

Appendix F: Troubleshooting

TV Reset Comparison Guide

You can resolve many common TV problems using the reset functions described in the following table. See also the troubleshooting suggestions later in this appendix.

IMPORTANT

Before you change sound or picture settings: If picture or sound settings seem wrong for a broadcast

channel (a channel from ANT 1, ANT 2, a cable box, or satellite receiver), first check other channels from the same input before changing settings. If most other channels from the same input seem correct, there is likely a problem with the broadcast rather than with the TV. Use care in this case, as changes you make to fix problems on individual channels also affect all other channels on the same input.

Reset Name	When to Use	How to Use			Resulting Action
Format	When the picture shape	Press the FORMAT key to cycle through the			The last-used format for a signal
	seems incorrect, use	available formats to find the best format			type is memorized for each input.
	FORMAT to change the	for the current picture.			The next time the same input and
	shape of the picture.				the same signal type is viewed, the
					last-used format will be recalled.
PerfectColor™	When the color intensities	1.	While viewing the input to be reset,		All PerfectColor/PerfecTint sliders
and PerfecTint™	seem out of balance,		press MENU to display the Main		are reset to the original center
Reset	use the PerfectColor/		menu with the A/V icon highlighted.		position. The PefectColor/PerfecTint
(for the single	PerfecTint reset to reset	2.	Use	to highlight PerfectColor	settings for other inputs remain
input currently	the color balances to the				unchanged.
			and press ENTER to display the
being watched)	original factory settings.
			PerfectColor adjustment screen.
	Both PerfectColor and
		3.	Press CANCEL to reset the colors.
	PerfecTint and are reset
	at the same time.
A/V Memory	When audio and/or video	1. While viewing the input to be reset,			All Audio and Video settings for the
Reset	settings for a single input		press MENU to display the Main		individual input are reset except
(for the single	seem incorrect, use A/V		menu with the A/V icon highlighted.		for the Listen To, Language, audio
input currently	Memory Reset to return	2.	Use	to highlight the Reset	Balance, and Closed Caption
being watched)	the input to the original				settings.
			icon and press ENTER to reset.
	factory settings.
A/V Reset	To reset audio and video	While viewing the TV, press the control-			All Audio and Video settings are
(for all inputs)	adjustments for all inputs	panel buttons GUIDE and FORMAT at the			returned to the original factory
	to the original factory	same time.			settings, including Listen To and
	settings.				Language, plus Closed Captions
					settings and Format settings.
Channel	To erase and	1.	While viewing the TV, press MENU to		All previously memorized chan-
Memorization	re-memorize channels on		display the Main menu.		nels for the selected antenna
	Ant 1 or Ant 2.	2.	Press	to highlight the Setup	input are erased and a new
		3.	icon.	to highlight the Scan	set of memorized channels is
			Press		created. All custom settings for
		4.	icon.		Fav, channel names, and channel
			Press	to highlight the antenna	locks are deleted. To add or
			input and reception mode, e.g.		delete individual channels, see
			Ant 1 Air.		Edit menu instructions on page
		5.	Press	to highlight the Start	44.
			button icon and press ENTER to
			start the memorization.
Lock Menu Pass	To change your Lock	See the cutout page in Appendix B, page			Allows a new code to be established.
Code	menu pass code	65.
Control-Panel	To re-enable the control-	Press and hold the MENU button			Allows the control panel to be
Lock Release	panel buttons after	on the control panel for over eight			unlocked if the remote control is
	activation of the Control-	seconds. This works even if the TV			misplaced.
	Panel Lock	is powered off.