Asus M2NBP-VM CSM manual Digital audio connector 4-1 pin Spdifout

5.CPU, Chassis, and Power Fan connectors

(4-pin CPU_FAN, 3-pin CHA_FAN1/2, 3-pin PWR_FAN)

The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the motherboard, making sure that the black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors.

Only CPU Fan and CHA_Fan1 connectors support Q-Fan2 function.

PWR_FAN	CPU_FAN
CPU_FAN	PWM PWR
	IN GND
	FAN
CHA_FAN1	FAN FAN
	CPU
	CPU CPU
CHA_FAN2	CHA_FAN1
M2NBP-VM CSM
	Rotation
	+12V
	GND

M2NBP-VM CSM Fan connectors

PWR_FAN

GND +12V Rotation

CHA_FAN2

Rotation +12V GND

6.Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis.

The S/PDIF module is purchased separately.

M2NBP-VM CSM

+5V SPDIFOUT GND

SPDIF_OUT

M2NBP-VM CSM Digital audio connector

ASUS M2NBP-VM CSM 1-29