Asus M2NBP-VM CSM manual PCIPnP, Plug & Play O/S No, Primary Display Adapter PCI-E, IRQ Resources

2.4.5PCIPnP

Phoenix-Award BIOS CMOS Setup Utility

Advanced

PCIPnP				Select Menu
Plug & Play O/S	[		]	Item Specific Help
		No
Primary Display Adapter	[PCI-E]			Select Yes if you are using
Resources Controlled By	[Auto]
				a Plug and Play capable
x IRQ Resources
				operating system Select
** PCI Express relative itmes **				No if you need the BIOS to
Maximum Payload Size	[4096]			configure non-boot devices

Plug & Play O/S [No]

When set to [No], the BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot.

Configuration options: [No] [Yes]

Primary Display Adapter [PCI-E]

Sets which graphics controller to use as primary boot device.

Configuration options: [PCI] [Onboard] [PCI-E]

Resources Controlled By [Auto]

When set to [Auto], the BIOS automatically configures all the boot and Plug and Play compatible devices. Set to [Manual] if you want to assign the IRQ DMA and memory base address fields. Configuration options: [Auto] [Manual]

When the item Resources Controlled By is set to [Auto], the item IRQ Resources is grayed out and not user-configurable. Refer to the section “IRQ Resources” for information on how to enable this item.

IRQ Resources

This sub-menu is activated only when the Resources Controlled By item is set to [Manual].

Phoenix-Award BIOS CMOS Setup Utility

Advanced

			IRQ Resources		Select Menu
IRQ-5	assigned to			[PCI Device]	Item Specific Help
IRQ-7	assigned to			[PCI Device]
IRQ-9	assigned to			[PCI Device]	Legacy ISA for devices
IRQ-10		assigned to		[PCI Device]	compliant with the
IRQ-11		assigned to		[PCI Device]
					original PC AT bus
IRQ-14		assigned to		[PCI Device]
					specification, PCI/ISA
IRQ-15		assigned to		[PCI Device]
					PnP for devices
					compliant with the

ASUS M2NBP-VM CSM 2-25