Asus M2NBP-VM CSM manual ATX power connectors 24-pin EATXPWR, 4-pin ATX12V

12.ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•We recommend that you use an ATX 12 V Specification 2.0‑compliant power supply unit (PSU) with a minimum of 300 W power rating. This PSU

type has 24-pin and 4-pin power plugs.

•If you intend to use a PSU with 20-pin and 4-pin power plugs, make sure that the 20-pin power plug can provide at least 15 A on +12 V and that the PSU has a minimum power rating of 300 W. The system may become unstable or may not boot up if the power is inadequate.

•Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot up.

•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•You must install a PSU with a higher power rating if you intend to install additional devices.

				EATXPWR
			+3 Volts		+3 Volts
			-12 Volts		+3 Volts
			Ground		Ground
	ATX12V		PSON#		+5 Volts
			Ground		Ground
M2NBP-VM CSM	GND	GND	Ground		+5 Volts
			Ground		Ground
	+12V DC	+12V DC
			-5	Volts	Power OK
			+5	Volts	+5V Standby
			+5	Volts	+12 Volts
M2NBP-VM CSM ATX power connectors			+5	Volts	+12 Volts
			Ground		+3 Volts

ASUS M2NBP-VM CSM 1-33