Asus M2NBP-VM CSM manual Primary and Secondary IDE Master/Slave, Access Mode Auto

2.3.4Primary and Secondary IDE Master/Slave

While entering Setup, the BIOS automatically detects the presence of IDE devices. There is a separate sub-menu for each IDE device. Select a device item then press <Enter> to display the IDE device information.

Phoenix-Award BIOS CMOS Setup Utility

Main

	Primary IDE Master					Select Menu
Primary IDE Master		[		]		Item Specific Help
			Auto
Access Mode		[Auto]				Press [Enter] to
Capacity		82			GB	select.
Cylinder		39420
Head		16
Sector		255
PIO Mode		[Auto]
UDMA Mode		[Auto]
Transfer Mode			UDMA 6
F1:Help	↑↓ : Select Item	-/+: Change Value				F5: Setup Defaults
ESC: Exit	→←: Select Menu	Enter: Select Sub-menu				F10: Save and Exit

The BIOS automatically detects the values opposite the dimmed items (Capacity, Cylinder, Head, Sector and Transfer Mode). These values are not user- configurable. These items show N/A if no IDE device is installed in the system.

Primary IDE Master/Slave [Auto]

Secondary IDE Master/Slave [Auto]

Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, the BIOS automatically fills in the correct values for the remaining fields on this sub-menu. If the hard disk was already formatted on a previous system, the setup BIOS may detect incorrect parameters. Select [Manual] to manually enter the IDE hard disk drive parameters. If no drive is installed select [None]. Configuration options: [None] [Auto] [Manual]

Access Mode [Auto]

The default [Auto] allows automatic detection of an IDE hard disk drive. Select [CHS] for this item if you set the IDE Primary Master/Slave to [Manual]. Configuration options: [CHS] [LBA] [Large] [Auto]

Before attempting to configure a hard disk drive, make sure you have the correct configuration information supplied by the drive manufacturer. Incorrect settings may cause the system to fail to recognize the installed hard disk.

2-16 Chapter 2: BIOS setup