Asus M2NBP-VM CSM Hardware Monitor, Fan Controller Disabled, CPU Temperature, M/B Temperature

2.5.4Hardware Monitor

The items in this sub-menu displays the hardware monitor values automatically detected by the BIOS. It also allows you to change CPU Q-Fan feature-related parameters. Select an item then press <Enter> to display the configuration options.

Phoenix-Award BIOS CMOS Setup Utility

Power

Hardware Monitor					Select Menu
Q-Fan Controller	[			]
		Disabled			Item Specific Help
Vcore Voltage	[	1.41V]
3.3V Voltage	[	3.28V]			Press [Enter] to
5V Voltage	[	4.98V]
					enable or disable
12V Voltage	[ 11.58V]
CPU Temperature			35ºC
M/B Temperature			34ºC
CPU Fan Speed		3068	RPM
Chassis Fan1 Speed		0	RPM
Chassis Fan2 Speed		0	RPM
Power Fan Speed		0	RPM
CPU Fan Speed warning	[ 800 RPM]

Q-Fan Controller [Disabled]

Allows you to enable or disable the Q-Fan controller.

Configuration options: [Disabled] [Enabled]

Vcore Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through the onboard voltage regulators.

Configuration options: [xxx] [Ignored]

CPU Temperature, M/B Temperature

The onboard hardware monitor automatically detects and displays the motherboard and CPU temperatures. These items are not user-configurable.

CPU Fan Speed [xxxxRPM]

Chassis Fan1/Fan2 Speed [xxxxRPM]

Power Fan Speed [xxxxRPM]

The onboard hardware monitor automatically detects and displays the CPU, Chassis, and chip fan speeds in rotations per minute (RPM). If any of the fans is not connected to the motherboard, the field shows 0. These items are not user- configurable.

CPU Fan Speed warning [800 RPM]

Sets the CPU fan speed warning feature.

Configuration options: [Disabled] [800RPM] [1200RPM] [1600RPM]

ASUS M2NBP-VM CSM 2-33