USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps). Configuration options: [FullSpeed] [HiSpeed]
BIOS EHCI Hand-off [Enabled]
Allows you to enable the support for operating systems without an EHCI hand‑off feature. Configuration options: [Disabled] [Enabled]
Legacy USB Support [Enabled]
Allows you to enable or disable the support for legacy USB devices. Setting to [Auto] allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
4.5Power menu
The Power menu items allow you to change the settings for the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options.
|
|
| BIOS SETUP UTILITY | ||
Main | Advanced | Power | Boot | Tools | Exit |
Suspend Mode |
| [Auto] |
| Select the ACPI state | |
|
| used for System | |||
Repost Video on S3 Resume | [No] |
| |||
| Suspend. | ||||
ACPI 2.0 Support |
| [Disabled] | |||
|
| ||||
ACPI APIC Support |
| [Enabled] |
| ||
APM Configuration
Hardware Monitor
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F10 | Save and Exit |
ESC | Exit |
v02.61 (C)Copyright
4.5.1Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
Chapter 4: BIOS setup |