Marvell 6121 Option Rom [Disabled]

This item appears when you enable Marvell 6121 SATA Controller. Configuration options: [Enable] [Disabled]

Marvell IDE/RAID function [IDE]

This item appears when you enable Marvell 6121 Option Rom.

If you want to create a RAID 0, RAID 1, or RAID 0+1 configuration from the Serial ATA hard disk drives, set this item to [RAID].

If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices, keep the default setting [IDE].

Primary Display Adapter [PCI-E]

Allows you to select which graphics controller to use as the primary boot device. Configuration options: [PCI-E] [PCI]

4.4.6PCI PnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

Take caution when changing the settings of the PCI PnP menu items. Incorrect field values can cause the system to malfunction.

BIOS SETUP UTILITY

 

Advanced

 

 

 

 

Advanced PCI/PnP Settings

 

NO: lets the BIOS

WARNING: Setting wrong values in below sections

configure all the

devices in the system.

 

may cause system to malfunction.

YES: lets the

Plug And Play O/S

[No]

operating system

configure Plug and Play

PCI Latency Timer

[64]

(PnP) devices not

Allocate IRQ to PCI VGA

[Yes]

required for boot if

Palette Snooping

[Disabled]

your system has a Plug

IRQ3

[PCI Device]

and Play operating

system.

IRQ4

[PCI Device]

 

 

IRQ5

[PCI Device]

 

Select Screen

IRQ7

[PCI Device]

 

 

Select Item

IRQ9

[PCI Device]

 

+-

Change Option

IRQ10

[PCI Device]

F1

General Help

IRQ11

[PCI Device]

F10

Save and Exit

IRQ14

[PCI Device]

ESC

Exit

IRQ15

[PCI Device]

 

 

v02.61 (C)Copyright 1985-2007, American Megatrends, Inc.

Plug And Play O/S [No]

When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot.

Configuration options: [No] [Yes]

4-26

Chapter 4: BIOS setup