To install the RAID driver in Windows® XP:

1.During the OS installation, the system prompts you to press the F6 key to install third-party SCSI or RAID driver.

2.Press <F6> then insert the floppy disk with RAID driver into the floppy disk drive.

3.When prompted to select the SCSI adapter to install, make sure you select SB 600 and Marvell 6121.

4.Follow the succeeding screen instructions to complete the installation.

To install the RAID driver in Windows® Vista™:

1.Insert the floppy disk/USB device with RAID driver into the floppy disk drive/USB port.

2.During the OS installation, select SB 600 and Marvell 6121.

3.Follow the succeeding screen instructions to complete the installation.

5-50

Chapter 5: Software support