M3A32-MVP DELUXE

PRI_IDE

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

M3A32-MVP DELUXE IDE connector

3.AMD® SB600 Southbridge Serial ATA connectors

(7-pin SATA1 [red]; SATA2 [black]; SATA3 [red]; SATA4 [black])

These connectors are for the Serial ATA signal cables for Serial ATA hard disk and optical disk drives.

If you install SATA hard disk drives to the SATA1/2/3/4 connectors, you can create a RAID 0, RAID 1, or RAID 0+1 configuration through the onboard

AMD® SB600 controller.

• These connectors are set to [IDE] by default. If you intend to create a Serial ATA RAID set using these connectors, set the Onchip SATA Type item in the BIOS to [RAID]. See section 4.3.6 Storage Configuration for details.

•Before creating a RAID set, refer to 5.4 RAID Configurations or the manual bundled in the motherboard support DVD.

M3A32-MVP DELUXE

GND RSATA RXN3 RSATA RXP3 GND RSATA TXN3 RSATA TXP3 GND

GND RSATA RXN1 RSATA RXP1 GND RSATA TXN1 RSATA TXP1 GND

 

SATA3

SATA1

 

GND RSATA RXN4 RSATA RXP4 GND RSATA TXN4 RSATA TXP4 GND

GND RSATA RXN2 RSATA RXP2 GND RSATA TXN2 RSATA TXP2 GND

M3A32-MVP DELUXE

SATA4

SATA2

SATA connectors

 

 

ASUS M3A32-MVP Deluxe Series

2-29