4.1.3ASUS EZ Flash 2 utility

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using a DOS‑based utility. The EZ Flash 2 utility is built-in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self Tests (POST).

To update the BIOS using EZ Flash 2:

1.Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard.

2.Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.

3.You can launch the EZ Flash 2 by two methods.

(1)Insert the floppy disk / USB flash disk that contains the BIOS file to the floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

ASUSTek EZ Flash 2 BIOS ROM Utility V3.06

FLASH TYPE:

 

 

 

 

 

 

 

WINBOND W25X80

 

 

 

 

 

 

 

 

 

Current ROM

 

 

Update ROM

 

 

 

BOARD:

 

 

 

M3A32-MVP

 

 

 

 

 

 

 

 

 

 

BOARD:

Unknown

 

 

 

 

 

 

 

VER:

 

 

 

 

 

VER:

0301

 

Unknown

 

 

 

DATE:

 

10/04/07

DATE:

 

Unknown

 

 

PATH:

 

 

 

 

 

 

 

 

 

 

 

 

 

C:\

 

 

 

 

 

 

A:

 

 

 

 

 

 

C:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

Select or Load

[B] Backup [ESC] Exit

 

 

 

[Enter]

 

 

 

 

 

[Tab] Switch

[Up/Down/Home/End] Move

 

 

(2)Enter BIOS setup program. Go to the Tools menu to select EZ Flash2 and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file is found. Then press <Enter>.

4.When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and automatically reboots the system when done.

•This function can support devices such as USB flash disk, or floppy disk with FAT 32/16 format and single partition only.

•Do not shut down or reset the system while updating the BIOS to prevent system boot failure!

ASUS M3A32-MVP Deluxe Series

4-