Hit ÔDELÕ Message Display [Enabled]

When set to Enabled, the system displays the message ÒPress DEL to run SetupÓ during POST. Configuration options: [Disabled] [Enabled]

Interrupt 19 Capture [Disabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

4.6.3Security

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

BIOS SETUP UTILITY

 

 

 

Boot

 

 

Security Settings

 

 

 

<Enter>

to change

Supervisor Password

: Not

Installed

password.

<Enter>

again to

User Password

: Not

Installed

disabled password.

Change Supervisor Password

Change User Password

Select Screen

Select Item

Enter Change

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

Change Supervisor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item and press <Enter>.

2.From the password box, type a password composed of less than six letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message ÒPassword InstalledÓ appears after you successfully set your password.

To change the supervisor password, follow the same steps as in setting a user password.

4 - 36

Chapter 4: BIOS setup