Asus N4L-VM DH 13 . ATX power connectors (24-pinEATXPWR, 4-pinATX12V)

13 . ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

			EATXPWR
ATX12V		+3	Volts	Ground
		+12	Volts	+5 Volts
+12V DC	GND	+12	Volts	+5 Volts
		+5V Standby		+5 Volts
		Power OK		-5 Volts
N4L-VM DH		Ground		Ground
+12V DC	GND	+5 Volts		Ground
		Ground		Ground
		+5 Volts		PSON#
		Ground		Ground
N4L-VM DH ATX power connectors		+3	Volts	-12 Volts
		+3	Volts	+3 Volts

¥ For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version).

¥Do not forget to connect the 4-pin ATX +12 V power plug; otherwise, the system will not boot.

¥Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

¥Visit www.asus.com for the latest power requirements table.

ASUS N4L-VM DH 2 - 33