5.4.2Intel¨ RAID configurations

This motherboard supports RAID 0 and RAID 1 configurations for Serial ATA hard disks drives through the Intel¨ ICH7-M (DH) Southbridge chip.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID set(s). To do this:

1.Enter the BIOS Setup during POST.

2.Go to the Main Menu, select IDE Configuration, then press <Enter>.

3.Select the item ATA/IDE Configuration, then press <Enter> to display the configuration options.

4.From the configuration options, choose [Enhanced], then press <Enter> to set.

5.Select the item Configure SATA As, then press <Enter> to display the configuration options.

6.From the configuration options, choose [RAID], then press <Enter> to set.

7.Save your changes, then exit the BIOS Setup.

Refer to the Chapter 4 of the motherboard user guide for details on entering and navigating through the BIOS Setup.

5 - 28

Chapter 5: Software support