Resetting disks to non-RAID

When you install an HDD that has been configured as part of another RAID set, you may convert this broken RAID HDD to non-RAID mode. All original data, however, will be lost.

To prevent damage to your system, you cannot select the HDD when configuring a RAID set through the JMB363 utility.

To reset disks to non-RAID:

1.In the main JMB363 RAID BIOS menu, highlight Revert HDD to non-RAIDusing the up/down arrow key then press <Enter>.

2.Use the space bar to select the HDD that you want to reset to non-RAD.

A selected HDD shows a sign before it.

3.A dialogue box appears to confirm the action. Press <Y> to confirm; otherwise, press <N>.

Saving the settings and exiting setup

When you have finished, highlight Save & Exit Setup using the up/down arrow key then press <Enter> to save the current RAID configuration and exit the JMB363 RAID BOS utility.

A dialogue box appears to confirm the action. Press <Y> to confirm; otherwise, press <N> to return to the JMB RAID BIOS menu.

ASUS N4L-VM DH

5 - 41