N4L-VM DH

N4L-VM DH IDE connector

IDE

NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.

PIN 1

3 . Intel¨ ICH7-M DH Southbridge Serial ATA connectors (7-pin SATA0 [black], SATA2 [black])

These connectors are for the Serial ATA signal cables for Serial ATA I (1.5 Gb/s) hard disk and optical disk drives.

If you installed Serial ATA hard disk drives, you can create a RAID 0, RAID 1, and Intel¨ Matrix Storage configuration through the onboard Intel¨ RAID controller. Refer to section Ò5.4.2 Intel¨ RAID configurationsÓ for details on how to set up Serial ATA RAID configurations.

The RAID function of these connectors is set to [Disabled] by default. If you intend to create a Serial ATA RAID set using these connectors, set the Configure SATA As item in the BIOS to [RAID]. See section Ò4.3.5 IDE ConfigurationÓ for details.

N4L-VM DH

N4L-VM DH SATA connectors

GND

RSATA_TXP2

RSATA_TXN2

GND

RSATA_RXP2

RSATA_RXN2

GND

SATA2

SATA0

GND

RSATA_RXN1

RSATA_RXP1

GND

RSATA_TXN1

RSATA_TXP1

GND

ASUS N4L-VM DH

2 - 27