![](/images/backgrounds/166051/166051-6862x1.png)
UTILITY
VI. ADAPTEC
If I am running under Windows95, do I need lines for the Adaptec real mode ASPI drivers and mscdex in my config.sys and autoexec.bat files?
Usually, you do not need to use these real mode ASPI drivers, because the new Windows miniport drivers support most SCSI host adapters and SCSI devices. How- ever, you need to load the drivers (including mscdex, if you have a CDROM drive) if any of the following is true:
•You are running in MSDOS mode•You are using a scanner or another SCSI device with config.sys- or autoexec.bat- based drivers, such as HP’s sjiix.sys
•You have an older model•You are using a
To install the Adaptec EZSCSI DOS drivers, click the Start button and select Restart the computer in
Some older models of SCSI CDROM drives are not compatible with the embedded Windows95 CDROM driver. You can add support for the CDROM drive by doing the following:
1Click the Start button and select Restart the computer in3When you are finished running Adaptec EZSCSI for DOS, find the file named cdtsd.vxd in the windows\system\iosubsys directory and rename it cdtsd.sav.
My CDROM drive shows up as more than one icon under My Computer.The mapping between mscdex, which runs in real mode, and the Windows95 CDROM driver does not match. You can correct this in one of two ways:
•Comment out the line that loads mscdex.exe in the autoexec.bat file.•Change the /L switch on the line that loads mscdex.exe in the autoexec.bat file so it assigns the CDROM drive the next highest logical drive letter after the hard disk drives.
56 | ASUS |