Installation Preparation
PARTS SUPPLIED:
Two #8 Phillips flat head wood screws, 5/8”long to secure dishwasher to underside of countertop
(in literature package).
2 Wood Screws
MATERIALS YOU WILL NEED:
Ferrule, compression nut and 90° Elbow (3/8”NPT external thread on one end, opposite end sized to fit water supply)
Thread seal tape
UL Listed wire nuts (3)
|
| Wire Nuts (3) |
90° Elbow, | Hand | Thread |
Ferrule and | Seal Tape | |
Compression Nut | Valve |
|
Materials For New Installations Only:
Air gap for drain hose, if required
Waste tee for house plumbing, if applicable
Electrical cable or power cord, if applicable
Screw type hose clamps
Strain relief for electrical connection.
Hand
Water line 3/8”min. copper
Coupler for extending drain line, if applicable
Waste Tee | Hot Water line |
|
Electrical Cable
(or Power Cord, if applicable)
Strain Relief
Air Gap | Screw Type | |
Hose Clamps | ||
|
Coupler
TOOLS YOU WILL NEED:
Phillips head screwdriver
| 5/16”and 1/4”nutdriver | Phillips head | 5/16”and | |
| 6” Adjustable wrench | |||
screwdriver | 1/4”nutdriver |
Level
| Carpenters square |
|
| Measuring tape | Safety glasses |
| Safety glasses | Measuring tape |
|
|
Flashlight
Bucket to catch water when flushing the line
Gloves
Level
6” Adjustable
wrench
Carpenters
square
Flashlight
For New Installations Only: | Bucket |
| |
Tubing cutter | Gloves | ||
|
Drill and appropriate bits
Hole saw set | Tubing cutter | Drill and Bits | Hole saw set |
|
|
|
2