9.The RAID drivers are copied to the floppy disk. After creating a RAID driver disk, eject the floppy disk, then write‑protect it to prevent computer virus infection.

10.Press any key to return to the Makedisk menu.

To create a RAID driver disk in Windows® environment:

1.Place the motherboard support CD in the optical drive.

2.Click the Make Disk menu tab, then select the RAID driver disk you wish to create:

•Click Make ICH7R 32 bit RAID Driver Disk to create an Intel® ICH7R RAID driver disk for a 32-bit system.

•Click Make ICH7R 64 bit RAID Driver Disk to create an Intel® ICH7R RAID driver disk for a 64-bit system.

•Click Make Marvell 88SE6141 SATA2 RAID Driver Disk to create a Marvell® 88SE6141 SATA2 RAID driver disk for a 32‑bit system.

Or

Browse the contents of the support CD to locate the driver disk utility.

Refer to section “5.2.4 Make Disk menu” for details.

3.Insert a formatted high-density floppy disk to the floppy disk drive.

4.Follow screen instructions to complete the process.

5.After creating a RAID driver disk, eject the floppy disk, then write‑protect it to prevent computer virus infection.

To install the RAID driver:

1.Install an operating system to the selected hard disk drive. During installation, the computer prompts you to press the F6 key if you are installing a third-party SCSI or RAID driver.

2.Press <F6>, then insert the RAID driver disk to the floppy disk drive.

3.Follow screen instructions to install the RAID drivers. 

ASUS P5WDG2 WS Professional/P5WDG2 WS PRO/WiFi-AP

5-41