4.1.3 ASUS EZ Fl ash 2 utili ty

The ASUS EZ Flash 2 feature allows you to update the BIOS without having to go through the long process of booting from a floppy disk and using

a DOS‑based utility. The EZ Flash 2 utility is built in the BIOS chip so it is accessible by pressing <Alt> + <F2> during the Power-On Self-Test (POST).

To update the BIOS using EZ Flash 2:

1.Visit the ASUS website (www.asus.com) to download the latest BIOS file for the motherboard and rename the same to WDG2WSP.ROM.

2.Save the BIOS file to a floppy disk or a USB flash disk, then restart the system.

3.You can launch the EZ Flash 2 by two methods.

(1)Insert the floppy disk / USB flash disk that contains the BIOS file to the floppy disk drive or the USB port.

Press <Alt> + <F2> during POST to display the following.

ASUSTek EZ Flash 2 BIOS ROM Utility V3.00

FLASH TYPE: Winbond W39V080A 8Mb LPC

 

Current ROM

Update ROM

BOARD: P5WDG2-WS Pro

BOARD: Unknown

VER: 0204

VER: Unknown

DATE: 07/04/2006

DATE: Unknown

PATH:

 

 

A:\

 

 

 

Note

 

 

[Enter] Select

[S] Save

[ESC]Exit

[Tab] Switch

[Up/Down/Home/End] Move

(2)Enter BIOS setup program. Go th the Tools menu to select EZ Flash 2 and press <Enter> to enable it.

You can switch between drives by pressing <Tab> before the correct file is found. Then press <Enter>.

4.When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process and automatically reboots the system when done.

•This function can supp ort devices such as USB flash disk, or floppy disk with FAT 32/16 format and single partition only.

•Do not shutdown or reset the system while updating the BIOS to prevent system boot failure!

ASUS P5WDG2 WS Professional/P5WDG2 WS PRO/WiFi-AP

4-