9. Chassi s i ntrusi on connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component

is removed or replaced. The signal is then generated as a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted with a jumper cap. Remove the jumper caps only when you intend to use the chassis intrusion detection feature.

P5WDG2-WS PRO

+5VSB MB

Chassis Signal GND

CHASSIS

(Default)

P5WDG2-WS PRO Chassis intrusion connector

ASUS P5WDG2 WS Professional/P5WDG2 WS PRO/WiFi-AP

2-37