FSB Termi nati on Vol tage [ Auto]

Allows you to select the front side bus termination voltage. Configuration options: [Auto] [1.20V] [1.30V] [1.40V] [1.50V]

Setting a high FSB termination voltage may damage the chipset and CPU.

MCH Chi pset Vol tage [ Auto]

Allows you to select the chipset voltage of the memory controller hub (MCH). Configuration options: [Auto] [1.50V] [1.60V] [1.70V] [1.80V]

Setting a high MCH chipset voltage may damage the chipset!

I CH Chi pset Vol tage [ Auto]

Allows you to select the chipset voltage of the I/O controller hub (ICH). Configuration options: [Auto] [1.05V] [1.20V]

Setting a high ICH chipset voltage may damage the chipset!

The following item appears only when the AI Overclocking item is set to [Overclock Profile].

Overcl ock Opti ons [ Overcl ock 5%]

Allows you to overclock the CPU speed through the available preset values.

Configuration options: [Overclock 5%] [fsb888/ddr2-667] [Overclock 10%] [fsb960/ddr2-800]

[Overclock 15%] [fsb1200/ddr2-800]

[Overclock 20%] [fsb1280/ddr2-800]

[Overclock 30%] [fsb1333/ddr2-667] [fsb1333/ddr2-834]

The following item appears only when the AI Overclocking item is set to [AI NOS].

NOS Mode [ Auto]

Sets the Non-Delay Overclocking System mode. Select either of the following configuration options:

Auto - loads the optimum sensitivity and overclocking percentage setting.

Manual - allows you to manually set overclocking configurations.

4-22

Chapter 4: BIOS setup