Asus Internal connectors, P8H77-I Digital audio connector, P8H77-I Front panel audio connector

1.10.2Internal connectors

1.Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector.

AGND NC SENSE1 RETUR SENSE2 RETUR AGND NC NC NC

AAFP

I-P8H77

PIN 1

LPORT1 RPORT1 RPORT2 SEND_ LPORT2 SENSE HD-audio-compliant pin definition

PIN 1

Line out_L

NC

Line out_R

MICPWR

MIC2

Legacy AC’97

compliant definition

P8H77-I Front panel audio connector

• We recommend that you connect a high-definition front panel audio module to this connector to avail of the motherboard’s high-definition audio capability.

•If you want to connect a high-definition front panel audio module to this connector, set the Front Panel Type item in the BIOS setup to [HD]. If you want to connect an AC'97 front panel audio module to this connector, set the item to [AC97]. By default, this connector is set to [HD]. See section 2.5.6 Onboard Devices Configuration for details.

2.Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis.

I	+5V	SPDIFOUT	GND
-7P8H7

SPDIF_OUT

P8H77-I Digital audio connector

The S/PDIF module is purchased separately.

1-26 Chapter 1: Product introduction