14.Press F2_Continue. Drivers for the device controller that you selected are displayed. Your system boots to run the install program. The install program starts and your machine begins booting the complete Solaris operating environment. The following messages appears some time later, and prompts you to insert each of the Solaris Driver ITU diskette(s) required to install into your system:

Installing unbundled device driver supportExtracting driver list from tree...<ITU diskette name> driver-name...

Insert the Driver Update diskette labeled <ITU diskette name>. Press <ENTER> when ready.

15.Remove the Solaris Device Configuration Assistant Diskette. Reinsert the SYMHISL Driver ITU diskette that you inserted earlier into the diskette drive.

16.Press Enter. Packages and/or patches that contain the new drivers are installed from the diskette onto your machine. Messages about each installation appear accordingly. When the following prompt appears:

Insert the Driver Update diskette labeled <SYMHISL>.

Press <ENTER> when ready.

17.Insert the SYMHISL ITU diskette into the floppy disk drive. When the prompt asking if you wish to create a new instance of the SYMHISL package appears, respond with N for no. When the prompt asking if you wish to overwrite the existing instance of SYMHISL appears, respond with Y for yes.

18.If drivers on other Solaris Driver ITU diskettes are required, remove the Driver ITU diskette from the diskette drive, insert the next Driver ITU diskette when prompted to insert it, press Enter, and repeat this process until all drivers you need are installed.

19.Press Enter. When the installation has completed, the message “Installation complete” appears.

20.Remove the disk from the floppy disk drive. Reboot the system. When the Solaris operating environment is finished booting and running, the new devices whose drivers you installed are available.

ASUS PR-DLSW motherboard user guide

5-27