9.For the path to the OEM SCSI Adapter files, A:\WINNT\MINIPORT should be displayed. Select Continue. Then remove the floppy disk from your A: drive.

10.The System Settings Change message displays: “You must restart your computer before the new settings take effect. Do you want to restart your computer now?” Click on the Yes button to restart and reboot Windows NT. If you choose Cancel, remember that you must restart before the new driver loads.

11.Rebooting loads your new miniport driver(s).

5.1.2 Intel® 82551QM LAN Driver Installation

A. Preparing the Intel 82551QM LAN Driver Disk

Windows NT 4.0 does not have the drivers for the Intel 82551QM LAN controller. Before installing Windows NT 4.0, copy the LAN drivers from the PR-DLSW support CD into a floppy disk.

Prepare one blank formatted high density floppy disk before proceeding.

1.Insert the PR-DLSW support CD into the CD-ROM drive.

2.Run the dcreat.exe utility from the following path:

\Drivers\LAN\MAKEDISK

3.Insert the floppy disk into the floppy disk drive when prompted.

4.Proceed to the next section to install the LAN drivers from the driver disk that you created.

5-4

Chapter 5: OS Installation