10.Wake-On-LAN Connector (3-pin WOL_CON)

This connector supports a LAN card with a Wake-On-LAN output. The connector powers up the system when a wakeup packet or signal is received through the LAN card.

WOL_CON

Ground

PR-DLSW

PME +5 Volt Standby

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

PR-DLSW Wake-On-LAN Connector

11.Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On- Ring output. The connector wakes up the system when a ringup packet or signal is received through the internal modem card.

For external modems, Wake-On-Ring is detected through the COM port.

PR-DLSW

WOR

Ring#

Ground

PR-DLSW Wake-On-Ring Connector

ASUS PR-DLSW motherboard user guide

2-23