9.Two 68-pin Ultra160 SCSI Connectors (CHA-WIDE, CHB-WIDE)

This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the two channels. Each channel can support a maximum of 15 devices as specified by Ultra160 standards.

PR-DLSW

SCSI-A

 

 

 

 

 

 

 

 

1 35

 

 

 

68-Pin Ultra160/

Ultra2-Wide SCSI Connector

SCSI-B

68-Pin Ultra160/

Ultra2-Wide SCSI Connector

34 1

68 35

34 68

PR-DLSW Onboard SCSI Connectors

SCSI Connection Notes

This motherboard has two 68-Pin Ultra160 SCSI connectors; one for each of the two channels.

The onboard SCSI chipset incorporates an advanced multimode I/O cell that supports both single-ended (SE), Ultra2, and Ultra160 devices. With Ultra160 devices, the SCSI bus platform performs at full Ultra160 speeds (up to 160MB/s) and extended cabling 12m (or 25m in a point-to-point configuration). When an SE device is attached, the bus defaults to an SE speed and 1.5m cable length.

Connect SCSI devices as shown. Each channel should have only one type of SCSI standard (e.g. Ultra160, Ultra2, Ultra-Wide). Mixing SCSI devices on the same channel decreases performance of the slower device.

68-pin Internal SCSI Cable (Twisted-Pair Ribbon)

Channel B

68-pin Female

Internal SCSI Devices (up to 15 devices)

Terminator

68-pin Internal SCSI Cable (Twisted-Pair Ribbon)

PR-DLSW

Channel A

68-pin Female

Terminator

Internal SCSI Devices (up to 15 devices)

PR-DLSW SCSI Connection Example

2-22

Chapter 2: Hardware information