5.7SCO UnixWare Server

5.7.1 LSI® SCSI Driver Installation

A. Building the SCO UnixWare C8XX BTLD Diskette

To create a C8XX BTLD diskette to use with UnixWare 2.1.X or UnixWare 7, copy the raw dd image file onto a 1.44MB floppy disk. This process is dependent upon the operating system that you are using to create this diskette. See the instructions below for UNIX System and DOS System Users. After you have created the driver disk, label it “PCI SCSI SCO UnixWare driver”.

For UNIX System Users:

Follow these steps to create the BTLD diskette:

1.Insert a 3.5" diskette into the floppy disk drive.

2.At the UNIX prompt, type:

ddif=/<path>/unixware.dd of=/dev/rfd0

The <path> is where the dd image is located. For UnixWare 2.1.X, the dd image file is located here:

\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW21X\UNIXWARE.DD

For UnixWare 7, the dd image file is located here:

\Drivers\Sdms\Drivers\UNIXES\UNIXWARE\UW7 \UNIXWARE.DD

5-34

Chapter 5: OS Installation