5.6SCO Open Server 5.0.x

5.6.1 LSI® SCSI Driver Installation

A. Building the SCO OpenServer BTLD Diskette

To create a BTLD diskette for SCO OpenServer system, copy the raw dd image file onto a 1.44MB floppy disk. This process is dependent upon the operating system that you are using to create this diskette. See the instructions below for UNIX System and DOS System Users.

For UNIX System Users:

Follow these steps to create the BTLD diskette:

1.Insert a 3.5" diskette into the floppy disk drive.

2.At the UNIX prompt, type:

ddif=/<path>/sco.dd of=/dev/fd0135ds18

The <path> is where the dd image is located. On this CD-ROM, the dd image file is located here:

\Drivers\Sdms\Drivers\UNIXES\OPNSERVR\SCO.DDFor DOS System Users:

Under this section, you have two choices.

1.Use a utility that will copy the raw dd image onto a 1.44MB floppy disk. This dd image is located at:

\Drivers\Sdms\Drivers\UNIXES\OPNSERVR\SCO.DD

RAWRITE3.COM, which is a public domain utility, is available on this CD-ROM at this location:

\Drivers\Sdms\Drivers\UNIXES\RAWRITE3.COM

Instructions for using this utility are included in its accompanying RaWrite file or as a Microsoft Word document located at:

\Drivers\Sdms\Drivers\UNIXES\RAWRITE3.DOC

2.The other DOS alternative is to use the self-extracting image file that is located at:

\Drivers\Sdms\Diskimag\OPNSERVR.EXE

5-30

Chapter 5: OS Installation